Multiply one-sixth of the lowest tensile strength found stamped on any plate in the cylindrical shell by the thickness — expressed in inches or parts of an inch — of the thinnest plate in the same cylindrical shell, and divide by the radius or half... Stationary Engineering ... - Page 906by Joseph Gerald Branch - 1906 - 991 pagesFull view - About this book
| John William Nystrom - 1876 - 206 pages
...proportioning the strength of boilers to the steam-pressure is as follows : Rule. " Multiply one-sixth (£) of the lowest tensile strength found stamped on any...the cylindrical shell by the thickness expressed in parts of an inch of the thinnest plate in the same cylindrical shell, and divide the product by the... | |
| United States. Department of the Treasury - 1878 - 406 pages
...not found in the above table, can be ascertained by the following rule, viz : Multiply one-sixth (|) of the lowest tensile strength found stamped on any...plate in the same cylindrical shell, and divide by the radins or half diameter — also expressd in inches: — and the sum will be the pressure allowable... | |
| Charles Augustus Smith - 1885 - 226 pages
...not found in the above table, can be ascertained by the following rule, .viz: Multiply one-sixth (J) of the lowest tensile strength found stamped on any...pressure allowable per square inch of surface for singlerivetting, to which add 20 per centum for double-rivetting, etc. The hydrostatic pressure applied,... | |
| Charles Augustus Smith - 1885 - 224 pages
...by the following rule, viz: Multiply one-sixth (¿) of the lowest tensile strength found stamped 011 any plate in the cylindrical shell by the thickness—...pressure allowable per square inch of surface for singlerivetting, to which add 20 per centum for double-rivetting, etc. The hydrostatic pressure applied,... | |
| C. P. Kunhardt - 1887 - 258 pages
...pressure for any dimension of boilers must be ascertained by the following rule : Multiply one-sixth of the lowest tensile strength found stamped on any...pressure allowable per square inch of surface for single-riveting, to which add twenty per centum for double-riveting. RULE II. 4. The hydrostatic pressure... | |
| Joshua Rose - 1888 - 312 pages
...table annexed to these rules must be ascertained by the following rule, viz: Multiply one-sixth (£) of the lowest tensile strength found stamped on any...pressure allowable per square inch of surface for singleriveting, to which add twenty per centum for double-riveting. 4. The hydrostatic pressure applied... | |
| Emory Edwards - 1888 - 540 pages
...for any dimension of boilers must be ascertained by the following rule, viz: Multiply one-sixth (^) of the lowest tensile strength found stamped on any...plate in the same cylindrical shell, and divide by the radins or half diameter — also expressed in inches — and the sum will be the pressure allowable... | |
| Robert Wilson - 1889 - 492 pages
...following, viz. : " Multiply one sixth (-J-) of the lowest tensile strength found stamped on any plate of the cylindrical shell by the thickness — expressed...inches or parts of an inch — of the thinnest plate of the same cylindrical shell, and divide by the radius or half diameter — expressed in inches, —... | |
| Robert Wilson - 1892 - 530 pages
...following, viz.: "Multiply one sixth (£) of the lowest tensile strength found stamped on any plate of the cylindrical shell by the thickness — expressed...inches or parts of an inch — of the thinnest plate of the same cylindrical shell, and divide by the radins or half diameter — expressed in inches, —... | |
| Robert Wilson - 1889 - 490 pages
...cylindrical shell by the thickness — expressed in inches or parts of an inch — of the thinnest plate of the same cylindrical shell, and divide by the radius or half diameter— -expressed in inches, —and the sum will be the pressure allowable per square inch of surface for... | |
| |