GB/T 38185-2019: Translated English of Chinese Standard. (GBT 38185-2019, GB/T38185-2019, GBT38185-2019): Performance requirements and testing methods for electronic stability control system (ESC) for commercial vehiclesThis Standard specifies the terms and definitions, general requirements, performance requirements, test conditions, and test methods for electronic stability control system for commercial vehicles. This Standard is applicable to M2, M3, N2, N3 type vehicles with a maximum design total mass greater than 3500 kg equipped with an electronic stability control system. |
What people are saying - Write a review
We haven't found any reviews in the usual places.
Contents
3 | |
Scope | 4 |
Terms and definitions | 5 |
Test conditions | 10 |
Test methods | 13 |
Appendix A Informative Additional tests | 17 |
Other editions - View all
Common terms and phrases
acceleration according activated apply Automotive axle braking system carried clockwise and counterclockwise commercial vehicles common completed confirm consecutive tests control device control mode curve direction document driver electronic stability control engine/drive motor torque ESC braking ESC fault signalling ESC OFF control ESC OFF signalling fault signalling device front function GB/T ignition startup ignition system switch indicate initial install km/h lane change test least light load LOCK longer manufacturer maximum meet the following meet the requirements normal observe operation passing the test performance requirements position pressure provisions rated total mass recording reference speed remain request requirements of 5.1.1 respectively restored saddle set the ESC set the ignition shown in Figure single lane change specified stability control system Standard steering test straight subject vehicle temperature Test equipment test starting point test track testing methods tractor trailer turned vehicle speed wheel