 If any test specimen shows defective machining or develops flaws, it may be discarded and another specimen substituted. (c) If the percentage of elongation of any tension test specimen is less than that specified in Section 6 (a) and any part of the fracture...  Railway Age Gazette - Page 141917Full view - About this book
 | American Railway Master Mechanics' Association - 1918 - 678 pages
...Section 9 (a), and any part of the fracture is more than 34 ln. from the center of the gage length, as indicated by scribe scratches marked on the specimen before testing, a retest shall be allowed. 12. Retests. — (a) If the results of the physical tests of any test lot do not conform to the requirements... | |
 | American Society for Testing Materials - 1920 - 868 pages
...specified in Section 5 and any part of the fracture is outside the middle third of the gage length, as indicated by scribe scratches marked on the specimen before testing, a retest shall be allowedRetests. 9. If the results of the physical tests of any test lot do not conform to the requirements... | |
 | Philippines - 2001 - 90 pages
...than that specified, and any part of the fracture is outside the middle third of the gauge length, as indicated by scribe scratches marked on the specimen before testing, a retest shall be allowed. C3.4 If the results of an original tension test specimen fail to meet the specified minimum requirements... | |
 | American Society of Mechanical Engineers - 1915 - 1412 pages
...tension test specimen is less than that specified in Par. 67, and any part of the fracture is more than % in. from the center of the gage length of a 2-in....specimen before testing, a retest shall be allowed. IV PERMISSIBLE VARIATIONS IN GAGE 72 Permissible Variation. The thickness or cross-section of each... | |
 | George Bartholomew Haven, George Wright Swett - 1915 - 450 pages
...specified in Section 6 (a) and any part of the fracture is outside the middle third of the gage length, as indicated by scribe scratches marked on the specimen before testing, a retest shall be allowed. IV. PERMISSIBLE VARIATIONS IN WEIGHT AND GAGE. 12. When Ordered to Gage. — The thickness of each... | |
 | American Society of Mechanical Engineers - 1915 - 1466 pages
...specified in Par. 44 and any part of the fracture is outside the middle third of the gaged length, as indicated by scribe scratches marked on the specimen before testing, a re test shall be allowed. 48 Permissible Variations in Gage. The gage of each bar shall not vary more... | |
 | California. Industrial Accident Commission - 1916 - 170 pages
...Par. 67, and any part of the fracture is more than % in. from the center of the gage length of a 2-iu. specimen or is outside the middle third of the gage...specimen before testing, a retest shall be allowed. IV PERMISSIBLE VARIATIONS IN GAGE 72 Permissible Variation. The thickness or cross-section of each... | |
 | American Foundrymen's Society - 1916 - 694 pages
...Section 9 (a) and any part of the fracture is more than 24-inch from the center of the gage length, as indicated by scribe scratches marked on the specimen before testing, a retest shall be allowed. IV. WORKMANSHIP AND FINISH 14. The castings shall substantially conform to the sizes Wprkmanand shapes... | |
 | Roy A. Seaton - 1916 - 246 pages
...specified in Section 8(a) and any part of the fracture is outside the middle third of the gage length, as indicated by scribe scratches marked on the specimen before testing, a retest shall be allowed. IV. PERMISSIBLE VARIATIONS IN WEIGHT 13. Permissible Variations. — The weight of any lot of bars... | |
 | 1916 - 806 pages
...specified in Section 5 (a) and any part of the fracture is outside the middle third of the gage length, as indicated by scribe scratches marked on the specimen before testing, a re test shall be allowed., — r~| r—1 — *" t A f ** i 1 V • /ttwf2' | "-*^ W i J :* ' 1 w 1... | |
| |
