| 1975 - 258 pages
...applications available in the kit when the instructions for use as shown on the container are followed. (h) The declaration shall appear in conspicuous and...shall meet one-half the minimum height standards. (1) The declaration shall be in letters and numerals in a type size established in relationship to... | |
| 1971 - 748 pages
...shown on the container are followed. The propellant is included in the net quantity declaration. (g) The declaration shall appear in conspicuous and easily...shall meet one-half the minimum height standards. (h) The declaration shall be in letters and numerals hi a type size established in relationship to... | |
| 1974 - 258 pages
...permissible when all label information is so formed on the surface. Requirements of conspicuousncss and legibility shall include the specifications that:...shall meet one-half the minimum height standards. <h> The declaration shall be In letters and numerals in a type size established in relationship to... | |
| 1977 - 568 pages
...to width (of the letter) shall not exceed a differential Chapter I — Food and Drug Administration of 3 units to 1 unit (no more than 3 times as high...shall meet one-half the minimum height standards. (1) The declaration shall be in letters and numerals in a type size established in relationship to... | |
| 2001 - 620 pages
...conspicuousness and legibility shall include the specifications that: (1) The ratio of height to width (of i the letter) shall not exceed a differential of 3 units...minimum standards. (3) When fractions are used, each 1 component numeral shall meet onehalf the minimum height standards. (i) The declaration shall be in... | |
| 2000 - 736 pages
...The ratio of height to width of the letter shall not exceed a differential of 3 units to 1 unit, ie, no more than 3 times as high as it is wide. (2) Letter...numeral shall meet onehalf the minimum height standards. (h) The declaration shall be in letters and numerals in a type size established in relationship to... | |
| 1997 - 200 pages
...The ratio of height to width of the letter shall not exceed a differential of 3 units to 1 unit, ie, no more than 3 times as high as it is wide. (2) Letter...numeral shall meet onehalf the minimum height standards. (h) The declaration shall be in letters and numerals in a type size established in relationship to... | |
| 1991 - 620 pages
...The ratio of height to width of the letter shall not exceed a differential of 3 units to 1 unit, ie, no more than 3 times as high as it is wide. (2) Letter...case letter "o" or its equivalent that shall meet trie minimum standards. (3) When fractions are used, each component numeral shall meet onehalf the... | |
| 1997 - 668 pages
...sizes specified in paragraph (b) of this section shall be increased by Vie of an inch (1.5 mm). (d) Letter heights pertain to upper case or capital letters....equivalent that shall meet the minimum standards. (e) The ratio of height to width of a letter shall not exceed a differential of 3 units to 1 unit (no... | |
| 1993 - 628 pages
...differential of 3 units to 1 unit (no more than 3 times as high as it is wide). This height standard pertains to upper case or capital letters. When upper and lower...equivalent that shall meet the minimum standards. When fractions are used, each component numeral shall meet one-half the height standards. (4) The statement... | |
| |