 | American Railway Master Mechanics' Association - 1918 - 678 pages
...5. Flange Tests. — (a) For all tubes except superheater pipes, a test specimen not less than 4 in. in length shall have a flange turned over at right angles to the body of the tube, without showing cracks or flaws. This flange, as measured from the outside of the tube, shall be }& in. wide... | |
 | Harry de Berkeley Parsons - 1905 - 408 pages
...over 0.045 per cent 6. Chemical analyses will not be required for charcoal iron tubes. Flange Test. a. A test specimen not less than 4 inches in length shall...over at right angles to the body of the tube without showing cracks or flaws. This flange as measured from the outside of the tube shall be f inch wide.... | |
 | American Society for Testing Materials - 1912 - 440 pages
...PROPERTIES AND TESTS. 4. A test specimen not less than 4 in. in length shall have a flange f in. wide turned over at right angles to the body of the tube without showing cracks or flaws. 5. A test specimen 4 in. in length shall stand hammering flat until the inside... | |
 | 1913 - 420 pages
...PHYSICAL PROPERTIES AND TESTS. 4. (a) A test specimen not less than 4 in. in length shall Flange Tests. have a flange turned over at right angles to the body of the tube, without showing cracks or flaws. This flange, as measured from the outside of the tube, shall be f in. wide... | |
 | National Tube Co - 1913 - 614 pages
...and smaller and on all sizes of seamless tubes, a flange threeeighths (%) of an inch wide shall be turned over at right angles to the body of the tube without showing crack or opening at the weld. Internal Pressure Test. Each Lap-welded tube shall be subjected... | |
 | American Railway Master Mechanics' Association - 1914 - 886 pages
...each of which shall conform to the requirements specified. III. PHYSICAL PROPERTIES AND TESTS. 4. (a) A test specimen not less than 4 inches in length shall...flange turned over at right angles to the body of the tubes without showing cracks or flaws. This flange as measured from the outside of the tube shall be... | |
 | American Society of Mechanical Engineers - 1915 - 1412 pages
...specified. III PHYSICAL PROPERTIES AND TESTS 167 Flange Test, a A test specimen not less than 4 in. in length .shall have a flange turned over at right angles to the body of the tube without showing cracks or flaws. This flange as measured from the outside of the tube shall be % in. wide.... | |
 | Lionel Simeon Marks - 1916 - 1922 pages
...charcoal iron. Seamless tubea shall be made of open-hearth steel. A test specimen not leas than 4 in. in length shall have a flange turned over at right angles to the body of the tube without showing cracks or flaws. This flange as measured from the outside of the tube shall be 9s, in. wide.... | |
 | 1916 - 806 pages
...specified. III. PHYSICAL PROPERTIES AND TESTS. Flange Tests. 4. (fl) A test specimen not less than 4 in. in length shall have a flange turned over at right angles to the body of the Position afterUsing Flaring Too/-.., .•Position : afterdsina . Flatter. A - Outs. D/'am of Flue /essj".... | |
| |
... of having a flange turned over at right angles to the body of the tube to the width required by the applicable material specifications. 
