 Bent axle; cut journals that can not be made to run cool without turning; seamy journals in steel axles, or transverse seams in journals of iron axles, or unsafe on account of usage, accident, or derailment; collars broken or worn to one-fourth inch or...  Locomotive and Boiler Inspector's Handbook - Page 55by Adam J. O'Neil - 1929 - 274 pagesFull view - About this book
 | American Railway Master Mechanics' Association - 1918 - 678 pages
...extinguished. RUNNING GEAR. 33. Driving, Trailing, and Engine Truck Axles. — Driving, trailing, and engine truck axles with any of the following defects shall not be continued in service: Bent axle; cut journals that can not be made to run cool without turning; seamy journals in steel axles;... | |
 | 1921 - 1318 pages
...in evidence: "Rule 146. Forged Steel or Steel-Tired Wheels. "(a) Forged steel or steel-tired wheels with any of the following defects shall not be continued in service: "(b) Loose wheels; loose, broken or defective retaining rings or tires; broken or cracked habs, plates... | |
 | United States. Bureau of Yards and Docks - 1924 - 750 pages
...securely attached to rods, and grease-cup plugs shall be equipped with suitable fastenings. 22-65. Truck axles with any of the following defects shall not be continued in service: Bent axle; cut journals that can not be made to run cool without turning; seamy journals in steel axles;... | |
 | United States. War Department - 1945 - 138 pages
...following defects will not be continued in service: Cracked or bent axles, cut journals that cannot be made to run cool without turning; seamy journals in steel axles; transverse seams in iron axles or any seams in iron axles causing journals to run hot ; driving and... | |
 | 1967 - 542 pages
...of the following defects shall not be continued in service: (b) Bent axle; cut journals tha| cannot be made to run cool without turning ; seamy journals...less in thickness, fillet in back shoulder worn out. §91.136 Crank pins. (a) Crank pins shall be securely applied. Shimming or prick punching crank pins... | |
 | 1973 - 692 pages
...diameters of axles for various axle loads shall be as follows: § 230.135 Defects in tender truck axles. (a) Tender truck axles with any of the following defects shall not be continued in service: (b) Bent axle; cut journals that cannot be made to run cool without turning ; seamy journals in steel... | |
 | 1977 - 1212 pages
...diameter diameter diameter of of wheel of Journal «eat center § 230.135 Defects in tender truck axle«. (a) Tender truck axles with any of the following defects shall not be continued in service: (b) Bent axle; cut journals that cannot be made to run cool without turning; seamy journals in steel... | |
 | 1979 - 646 pages
...Dec. 25, 1968; 34 PR 11973, July 16, 1969] RUNNING GEAR § 230.213 Axles. (a) Defects. Driving and truck axles with any of the following defects shall not be continued in service: Cracked or bent axles; cut journals that cannot be made to run cool without turning; seamy journals... | |
 | 1971 - 484 pages
...following defects shall not be continued in service: Cracked or bent axles; cut journals that cannot be made to run cool without turning ; seamy journals in steel axles; transverse seams in iron axles; or any seams in iron axles causing journals to run hot; unsafe on account... | |
 | United States. Interstate Commerce Commission - 1961 - 1128 pages
...axle. Axle-bearing and armature-bearing caps shall be securely bolted in place. Motors or generators with any of the following defects shall not be continued in service : Broken and loose or excessively worn bearings ; excessive sparking or flashing over at the commutator... | |
| |
